Contents
No.101-HS-1 TABER TYPE ABRASION TESTER(TP) OPERATION & MOTION VIDEO
No.101-H TABER TYPE ABRASION TESTER
JIS A1453、(K5400)、K5600-5-8/9、K5665、K6264-2、K6404-4、K6902、K7204、(L1018)、L1085、L1096、ASTM D1044、TAPPI-T476、JAS、(JASO-M403)、ISO 4649、5470-1、7784-1/2、9352


- This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
- The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
- After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
- This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.
Specification
Main Body
Specifications are subject to change without notice. | |
Model | No.101-H TABER TYPE ABRASION TESTER |
Turn Table | φ150 mm |
Table Rotation Spee | 60 ± 2 rpm、70 ± 2 rpm、72 ± 2 rpm |
Weight Load | 2.45 N(250 gf)、4.9 N(500 gf)、9.8 N(1,000 gf) |
Counter | 6 Digits Preset Counter |
Suction Nozzle | Inner φ8 mm: 2 pcs |
Option | Inlet Pressure Gauge,Safety Cover |
Accessories | Abrasion Wheel: 1 set (2 sets for No.101-H-2), Thickness Guage: 2 pcs, Weight(4.9N,9.8N): 2 pcs each, Suction Device (Vacuum Cleaner): 1 set Power Plug Adaptor: 1 pc |
Power Source | 1 Hanging (No.101-H-1): AC 100 V, 1-Phase, 15 A, 50/60 Hz 2 Hangings (No.101-H-2): AC 100 V, 1-Phase, 20 A, 50/60 Hz *2 outlets required |
Dimensions/ Weight (Approx.) | 1 Hanging (No.101-H-1): W350 × D350 × H450 mm/ 25 kg 2 Hangings (No.101-H-2): W700 × D350 × H510 mm/ 45 kg |
No.101-K Sander (For Abrasion Wheel)
Specifications are subject to change without notice. | |
Tool | Diamond |
Rotation Speed | 1,300 rpm to 1,500 rpm (50 Hz) 1,550 rpm to 1,800 rpm (60 Hz) |
Accessories | Power Plug Adaptor: 1 pc |
Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz |
Dimensions/ Weight (Approx.) | W210 × D330 × H380 mm/ 10 kg |
No.101-HS TABER TYPE ABRASION TESTER
JIS A1453、(K5400)、K5600-5-8/9、K5665、K6264-2、K6404-4、K6902、K7204、(L1018)、L1085、L1096、ASTM D1044、TAPPI-T476、JAS、(JASO-M403)、ISO 4649、5470-1、7784-1/2、9352

- This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.
- It sucks the abraded scrap during the test.
- Not only that, it measures the air flow while sucking so it enables to have more precise test result.
Specification
Main Body
Specifications are subject to change without notice. | |
Model | No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER) |
Turn Table | φ150 mm |
Table Rotation Speed | 60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm |
Weight Load | 2.45 N(250 gf)、4.9 N(500 gf)、9.8 N(1,000 gf) |
Counter | 6 Digits Preset Counter |
Suction Nozzle | Inner φ8 mm: 2 pcs |
Option | Safety Cover |
Accessories | Abrasion Wheel: 1 set (2 sets for No.101-H-2), Thickness Guage: 2 pcs, Weight(4.9N,9.8N): 2 pcs each, Suction Device (Vacuum Cleaner): 1 set Power Plug Adaptor: 1 pc |
Power Source | AC 100 V, 1-Phase, 15 A, 50/60 Hz |
Dimensions/ Weight (Approx.) | W400 × D400 × H385 mm/ 25 kg |