No.283 PLASTIC SLIDING ABRASION TESTER
- This tester is used to conduct a sliding abrasion test for plastic.
- Contacting tabular and hollow cylinder type test specimen to the edge face of the opponent’s material at a constant load and giving them a high speed sliding and rotation, the operator is to measure the abrasion force and the abrasion volume.
※Output data such as the below can be monitored both individually and selectively, via tester-specific PC software.
Each data can also be graph-displayed.
-Number of Rotations / Test Speed
-Load / Contact Pressure
|Specifications are subject to change without notice.|
|Specimen||Square shape: 30 × 30 × T2 to 5 mm
Disc shape: φ40 × T2 to 5 mm
Cylindrical shape: Outer Diameter φ25.6 mm
Inner Diameter φ20 mm, L15 mm
|Co-Specimen||Cylindrical shape: Outer Diameter φ25.6 mm, Inner Diameter φ20 mm, L15 mm|
|Pressing Load||50 to 500 N (Dead Weight)|
|Friction Load Measuring||Load Cell: 200 N⋅cm (Option: Chart Recorder)|
|Friction Speed||0.2 to 200 cm/s (Standard 50 ± 2.5 cm/s)|
|Option||Oil Bath、Water Bath|
|Power Source||AC 100 V, 1-Phase, 15 A, 50/60 Hz
AC 200 V, 3-Phase, 30 A, 50/60 Hz (Constant Temperature Oven)
|Dimensions/ Weight (Approx.)||W810 × D900 × H1,560 mm, 267 kg|