No.553-M PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM) Movie

No.553 PENCIL SCRATCH HARDNESS TESTER (MANUAL)

JIS-(C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, ASTM-D2197, D3363, ISO-15184, IEC-60521-4
No.553 PENCIL SCRATCH HARDNESS TESTER (MANUAL)
  • This tester is used to evaluate the hardness of coated film according to the testing machine method.
  • Scratching the paint surface with a pencil attached at a 45° angle, the operator is to determine the hardest pencil that does not tear or damage the coated film.
  • The tester can also be used to evaluate the hardness of decorative sheet and resistance to solvents on enameled wire.

Specification

Specifications are subject to change without notice.
Model No.553 PENCIL SCRATCH HARDNESS TESTER (MANUAL) No.553-M PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM)
Specimen Base 100 × 180 mm M-1: 100 × 180 mm
M-2: 150 × 180 mm
Stroke Left-Right Max. 100 mm, Front-Back Max. 50 mm Left-Right Max. 100 mm, Front-Back Max. 50 mm
Scratching Angle 45° (60° for Enameled Wire) 45° (60° for Enameled Wire)
Scratching Speed Manual 1.75 mm/ 1 turn Motorized (Standard 0.5 to 1 mm/s)
Weight Load Max. 1 kgf (Balance Weight) Max. 1 kgf (Balance Weight)
Accessories Mitsubishi UNI Pencil (6B to 9H): Total 17 pcs, Abrasive Paper (#400), Spirit Level Mitsubishi UNI Pencil (6B to 9H): Total 17 pcs, Abrasive Paper (#400), Spirit Level
Option Heating Plate Spec, Conduction Device, Needle (φ3 mm, L23 mm, Top Angle 60°) Heating Plate Spec, Conduction Device, Needle (φ3 mm, L23 mm, Top Angle 60°)
Power Source AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions/Weight (Approx.) W440 × D200 × H250 mm, 8 kg M-1:
W440 × D200 × H440 mm, 20 kg
M-2:
W440 × D260 × H440 mm, 27 kg

Inquiry Form

No.553-S PENCIL SCRATCH HARDNESS TESTER (HAND PUSH)

JIS-K5600-5-4
No.553-S PENCIL SCRATCH HARDNESS TESTER (HAND PUSH)
  • This tester is used to evaluate the hardness of the coated film with prescript pencil according to the pencil method.
  • The tester is designed so that the pencil can scratch the testing surface at an angle of 45° and a test load of 750 g.

Specification

Specifications are subject to change without notice.
1 Loads Spec 3 Loads Spec
Scratching Angle 45 ± 1° 45 ± 1°
Test Load 750 gf 500 gf、750 gf、1,000 gf
Accessories Mitsubishi UNI Pencil (6B to 9H): Total 17 pcs,
Pencil Sharpener, Abrasive Paper (#1000),
Wooden case, additional weight (3 Loads Spec only)
Mitsubishi UNI Pencil (6B to 9H): Total 17 pcs,
Pencil Sharpener, Abrasive Paper (#1000),
Wooden case, additional weight (3 Loads Spec only)
Dimensions/ Weight (Approx.) W120 × D85 × H130 mm, 2 kg W120 × D85 × H130 mm, 2 kg

Inquiry Form

No.553-M PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM)

JIS-(C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, ASTM-D2197, D3363, ISO-15184, IEC-60521-4
No.553-M PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM)
  • Instead of moving the pencil arm manually, this model can move automatically.
  • We also have a double arm model, allowing for testing with 2 pencils simultaneously.

Specification

Specifications are subject to change without notice.
Model No.553 PENCIL SCRATCH HARDNESS TESTER (MANUAL) No.553-M PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM)
Specimen Base 100 × 180 mm M-1: 100 × 180 mm
M-2: 150 × 180 mm
Stroke Left-Right Max. 100 mm, Front-Back Max. 50 mm Left-Right Max. 100 mm, Front-Back Max. 50 mm
Scratching Angle 45° (60° for Enameled Wire) 45° (60° for Enameled Wire)
Scratching Speed Manual 1.75 mm/ 1 turn Motorized (Standard 0.5 to 1 mm/s)
Weight Load Max. 1 kgf (Balance Weight) Max. 1 kgf (Balance Weight)
Accessories Mitsubishi UNI Pencil (6B to 9H): Total 17 pcs, Abrasive Paper (#400), Spirit Level Mitsubishi UNI Pencil (6B to 9H): Total 17 pcs, Abrasive Paper (#400), Spirit Level
Option Heating Plate Spec, Conduction Device, Needle (φ3 mm, L23 mm, Top Angle 60°) Heating Plate Spec, Conduction Device, Needle (φ3 mm, L23 mm, Top Angle 60°)
Power Source AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions/Weight (Approx.) W440 × D200 × H250 mm, 8 kg M-1:
W440 × D200 × H440 mm, 20 kg
M-2:
W440 × D260 × H440 mm, 27 kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.