No.189-PN NOTCHING MACHINE

JIS K7144, ISO 2818
No.189-PN NOTCHING MACHINE

 

  • This machine is used to make a notch into test specimens that is required for Charpy and Izod impact tests.
  • When replacing the notch knife, the notch knife can be independently taken off to realize low running cost.

 

 

Specification

Specifications are subject to change without notice.
Clamp Opening Max. 40 mm (Standard: 4 mm × 10 pcs), Feed Speed 1.75 mm/ 1 turn
Cutter Rotation Speed (Approx.) 600 rpm (60 Hz), 500 rpm (50 Hz)
Notch Depth Manual, Range 0 to 4 mm (Scale 0.01 mm)
V-Notch Cutter Single Tooth Tip, Outer Diameter φ75 mm, T6.5 mm, Top Angle 45°, Top R 0.25 mm,
Material: High Speed Steel (Option: Cemented Carbide)
Option Pneumatic Clamp, U-Notch Cutter
Power Source AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions/ Weight (Approx.) W420 × D525 × H415 mm, 60 kg

Inquiry Form

No.189-PNA/PNCA NOTCHING MACHINE (AUTOMATIC)

JIS K7144, ISO 2818
No.189-PNA/PNCA NOTCHING MACHINE (AUTOMATIC)

 

  • Adding the electronic specimen sending system together with side cutting and electronic notch depth adjuster to the usual NOTCHING MACHINE, the automated series provides the operator to conduct optimal notching conditions for impact test samples.

 

 

Specification

Specifications are subject to change without notice.
Model No.189-PNA No.189-PNCA
Clamp Opening Max. 80 mm (4 mm × 20 pcs), Feed Speed 50 to 600 mm/min Opening Max. 80 mm (4 mm × 20 pcs), Feed Speed 50 to 600 mm/min
Cutter Axis 1 Axis (Notch only) 1 Axis (Notch & Side Cut)
Cutter Rotation Speed (Option) 150 to 1,780 rpm 150 to 1,780 rpm
Notch Depth Automatic, Range 0 to 4 mm (Scale 0.01 mm) Automatic, Range 0 to 4 mm (Scale 0.01 mm)
V-Notch Cutter Single Tooth Tip, Outer Diameter φ75 mm, T6.5 mm, Top Angle 45°, Top R 0.25 mm
Material: High Speed Steel (Option: Cemented Carbide)
Single Tooth Tip, Outer Diameter φ75 mm, T6.5 mm, Top Angle 45°, Top R 0.25 mm
Material: High Speed Steel (Option: Cemented Carbide)
Side Cutter Width 80 mm (Standard),
Outer Diameter φ100 mm, T1.6 mm
Accessories Suction Device (Vacuum Cleaner) Suction Device (Vacuum Cleaner)
Option Pneumatic Clamp, U-Notch Cutter Pneumatic Clamp, U-Notch Cutter
Power Source AC 100 V, 1-Phase, 15 to 20 A, 50/60 Hz AC 100 V, 1-Phase, 15 to 20 A, 50/60 Hz
Dimensions/ Weight (Approx.) W600 × D650 × H560 mm, 100 kg W600 × D650 × H560 mm, 100 kg

Inquiry Form

No.189-PFA SAMPLE FORMING MACHINE (AUTOMATIC)

No.189-PFA SAMPLE FORMING MACHINE (AUTOMATIC)
  • This machine enables the operator to prepare dumbbell type test specimens by cutting rigid plastic sheets with 2 spiral cutters.
  • The rotating speed of the cutters, cutting pressure, and the sending speed can be adjusted to provide the operator with optimum preparation of the dumbbell type test specimens.

 

 

Specification

Specifications are subject to change without notice.
Spiral Cutter φ25 mm, T25 mm
Cutter Rotation Speed 100 to 1,200 rpm
Pressure Gauge Max. 1 MPa (Scale 0.05 MPa)
Clamp Feed Speed 0.3 to 10 mm/s
Forming Jig To be Specified
Accessories Suction Device (Vacuum Cleaner)
Option Air Compressor
Power Source AC 200 V, 3-Phase, 20 A, 50/60 Hz
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.) W810 × D620 × H630 mm, 120 kg

Inquiry Form

No.189-PFA-S  SAMPLE FORMING MACHINE (FULL AUTOMATIC)

No.189-PFA-S  SAMPLE FORMING MACHINE (FULL AUTOMATIC)
  • This machine enables the operator to prepare dumbbell type test specimens by cutting rigid plastic sheets with 2 spiral cutters.
  • The rotating speed of the cutters, cutting pressure, and the sending speed can be adjusted to provide the operator with optimum preparation of the dumbbell type test specimens.
  • This model is the full automated version of the SAMPLE FORMING MACHINE, which can cut sheet material into pieces in the dumbbell or rectangle shapes.

 

Specification

Specifications are subject to change without notice.
Spiral Cutter φ25 mm, T25 mm
Cutter Rotation Speed 1000 to 3,000 rpm
Pressure Gauge Max. 1 MPa (Scale 0.05 MPa)
Clamp Feed Speed 30 to 300 mm/min
Forming Jig To be Specified
Accessories Cutter 1 set ( 2 pcs/set ), Suction Device (Vacuum Cleaner), Air Gun (Built In)
Safety Device Safety Cover, Overcurrent Protection
Power Source AC 200 V, 3-Phase, 40 A, 50/60 Hz
Air Source 0.5 to 0.65 MPa
Dimensions/ Weight (Approx.) Main Body : W1,350 × D1,150 × H1,830 mm, 735 kg
Suction Device (Vacuum Cleaner) : W640 × D780 × H1,020 mm, 59 kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.