No.120-FWP MELT FLOW INDEX TESTER (MANUAL)

JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133

 

No.120-FWP MELT FLOW INDEX TESTER (MANUAL)
  • This tester is for measuring the melt flow index of thermo-plastic.
  • The test can be conducted easily, from setting the test condition up to data analysis, using a 5.7” full color touch panel.

 

 

 

 

No.120-FWP Specification

Specifications are subject to change without notice.
Hangings 1 Hanging
Die φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range Max. 400 °C
Initial Weight 0.325 kgf
Additional Weight 1.20 〜 21.60(※ Please refer below)
Test Method Method A: Manual (Option: Automatic Cutter)
Method B: Automatic
Data Processing Method A: Automatic (Measuring the weight of the cut off specimen is done by hand)
Method B: Automatic
Method B Measuring Rotary Encoder
Standard Specification SD Card Slot, LAN Port
Option Mini Printer, Method A Air Pressure Type Automatic Cutter, Manual Type Die Plug, Safety Cover with Interlock Attached, Half Die, Air Pressure Type Automatic Loader (No.120-FWP-W)
Additional Weight ( 1.20, 2.16, 3.80,  5.00, 10.00, 21.60 kgf.)
Accessories Cleaning Rod (Die & Cylinder), Injection Rod, Funnel, Die Gauge, Method A Cutting Knife, Spirit Level, Gauze
Power Source AC 100 V, 1-Phase, 15 A, 50/60 Hz or
AC 200 V, 1-Phase, 10 A, 50/60 Hz
Air Source 0.5 MPa or More(For Method A Pneumatic Type Weight Loading Device Specification)
Dimensions/ Weight(Approx.) No.120FWP: W660× D450 × H1,020 mm/75 kg
No.120FWP-WP-W: W710 × D450 × H1,060 mm/ 120 kg

Inquiry Form

No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)

JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133
No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)
  • This tester is used to measure the melt flow index of thermo-plastic.
  • The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die.
  • The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test cycles).

 

 

No.120-SAS Specification

Specifications are subject to change without notice.
Hangings 1 or 3 Hangings (2 kinds)
Die φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range Max. 300 °C (Option: Max. 400 °C)
Initial Weight  0.325 kgf
Additional Weight 1.20 〜 21.60(※ Please refer below)
Test Method Method A: Manual (Option: Automatic)
Method B: Automatic
Specimen Feeding Automatic
Weight Loading Automatic
Weight Change Manual (Option: Automatic)
Cylinder Cleaning Automatic (Solvent Cleaning can also be Automatic)
Die Cleaning Automatic
Piston Cleaning Manual (Option: Automatic)
Die Cleaning Rod Cleaning Manual (Option: Automatic)
Cleaning Gauze Feeding Manual
Data Processing Method A: Manual (Option: Automatic)
Method B: Automatic
Method B Measuring Rotary Encoder
Software Windows Compatible
Accessories Cleaning Rod (Die, Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun
Option Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan (Standard for No.120-LABOT), Smoke-Detection Sensor (Standard for No.120-LABOT)
Additional Weight ( 1.20, 2.16, 3.80,  5.00, 10.00, 21.60 kgf.)
Power Source AC 200 V, 1-Phase, 10 A, 50/60 Hz
AC 200 V, 1-Phase, 15 A, 50/60 Hz (ISO 1133-2 Compatable Type)
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.) 1 Hanging: W675× D645 × H1,370 mm/200 kg
3 Hangings: W675 × D725 × H1,370 mm/ 220 kg

Inquiry Form

No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)

JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133
No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)
  • This tester is equipped with robotic mechanism which enables fully automatic melt flow index tests up to a maximum of 50 samples (standard of 12 samples).
  • The test conditions and the outputs can be set and observed through the computer software.

 

 

 

No.120-LABOT Specification

Specifications are subject to change without notice.
Hangings 12, 24, 50 Hangings (3 kinds)
Die φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range Max. 300 °C (Option: 400 °C)
Initial Weight 0.325 kgf
Additional Weight
1.20 〜 21.60(※ Please refer below)
Test Method Method A: Manual (Option: Automatic)
Method B: Automatic
Specimen Feeding Automatic
Weight Loading Automatic
Weight Change Manual (Option: Automatic)
Cylinder Cleaning Automatic (Solvent cleaning can also be automatic)
Die Cleaning Automatic
Piston Cleaning Automatic
Die Cleaning Rod Cleaning Automatic
Cleaning Gauze Feeding Automatic
Data Processing Method A: Manual (Option: Automatic)
Method B: Automatic
Method B Measuring Rotary Encoder
Software Windows Compatible
Accessories Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun
Option Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor
Additional Weight ( 1.20, 2.16, 3.80,  5.00, 10.00, 21.60 kgf.)
Power Source AC 200 V, 1-Phase, 10 A, 50/60 Hz
AC 200 V, 1-Phase, 15 A, 50/60 Hz (ISO 1133-2 Compatable Type)
Air Source 0.5 MPa or More
Dimensions/ Weight(Approx.) 12,24 Hangings:W950 × D680 × H1,720 mm/ 350 kg
50 Hangings:W1,100× D700 × H1,750 mm/ 400 kg

Inquiry Form

No.120 Gauze | Number of Basic Sales Lot

Cylinder Cleaning Gauze Basic Sales Lot : 1 box

※ Width 75 mm wide × 20 m

12 rolls/package × 6 packages/box
=144 rolls/box
Piston Cleaning Gauze Basic Sales Lot : 1 box

※ Width 100 mm × 9 m

30 rolls/package × 5 packages/box
=150 rolls/box

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.