No.216 UNIVERSAL MATERIAL TESTER

No.216 UNIVERSAL MATERIAL TESTER
  • This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber.
  • The tester capacity comes in either a maximum of 5 kN or 10 kN respectively. The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage.
  • Tester control and tensile strength calculation are both conducted via touch panel interface.

 

 

Specification

Specifications are subject to change without notice.
Model No.216-5kN UNIVERSAL MATERIAL TESTER No.216-10kN UNIVERSAL MATERIAL TESTER
Test Load Max. 5 kN Max. 10 kN
Stroke 1,000 mm* 1,000 mm*
Test Speed 1 to 1,000 mm/min 1 to 500 mm/min
Accessories Chuck shapes are to be consulted. Chuck shapes are to be consulted.
Options CSV Export Software, Extensometer
(Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
CSV Export Software, Extensometer
(Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W550 × D700 × H1,630 mm, 125 kg W860 × D750 × H1,610 mm, 172 kg

* The Chucks/ Loadcell length is not included.

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.