No.162 SLIP TESTER

JIS-P8147
No.162 SLIP TESTER
  • This tester is used to measure the friction coefficient of plastic film and paper according to the inclination method.
  • By inclining the inclination board at a constant speed, the static friction coefficient can be measured at the tangent at which the test specimen starts to slip.

 

 

 

Specification

Specifications are subject to change without notice.
Sled W60 mm, L100 mm, Mass 1,000 g
Slip Surface Affective Length 600 mm (Scale attached)
*Slip Detection Sensors are installed by default.
Inclination Angle 0 to 70° (Analog Scale, unit 0.2°)
Inclination Speed 1 °/s
Power Source AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions/ Weight (Approx.) W750 × D350 × H425 mm, 29 kg

Inquiry Form

No.162-FS SLIP TESTER (HORIZONTAL METHOD)

JIS-K7125、P8147、ASTM-D3247、ISO-8295、TAPPI-T816
No.162-FS SLIP TESTER (HORIZONTAL METHOD)
  • This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method.
  • The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.

 

 

Specification

Specifications are subject to change without notice.
Test Method Paper and Paperboard Plastic Film
Abrading Head W60 mm, L100 mm, Mass 1,000 g 63 × 63 mm (Abrading Surface 40 cm2)
Mass 200 ± 2 g (1.96 ± 0.02 N)
Flat Board W200 mm, L380 mm W200 mm, L380 mm
Specimen Surface: W100 mm, L250 mm
Sled: W60 mm, L120 mm
W80 mm, L200 mm, T0.5 mm or Less
Friction Measuring Load Cell: Max. 10 N, 20 N, 50 N Load Cell: Max. 10 N, 20 N, 50 N
Speed 10.0 ± 0.2 mm/min 100 ± 10 mm/min or 500 ± 10 mm/min
Accessories Accessory Plate (Mass Less than 5 g)
Option Variable Speed Spec, Software, Recorder, Heating Plate Spec. Variable Speed Spec, Software, Recorder, Heating Plate Spec.
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz AC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimensions/ Weight (Approx.) W600 × D375 × H415 mm, 35 kg W600 × D375 × H415 mm, 35 kg

Inquiry Form

No.162-OY O-Y PULL SLIP TESTER

JIS-A1454、A1509-12 
No.162-OY O-Y PULL SLIP TESTER
  • This tester evaluates the slippage of floor material.
  • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
  • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
  • In addition to the usual C.S.R, C.S.R-B can also be calculated.

 

Specification

Specifications are subject to change without notice.
Specimen 100 × 120 mm (Ceramic Tile: 90 × 135 mm)
Sled 80 × 70 mm
Vertical Weight Load Initial 294 N (30 kgf) to Max. 785 N (80 kgf) (Standard: 785 N)
Tension Angle 18°
Tension Load Measuring Load Cell, Max. 5 kN (Scale 1 N)
Tension Load Speed 785 N/s
Software Windows Compatible
Option Specimen Holder (Standard and Nosing Edge type),
Ceramic Tile Spec (with Sled, Testing Powder,
C.S.R.-B Measuring Software)
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) Tester Body: W1,610 × D580 × H1,600 mm, 428 kg
Control Box: W650 × D550 × H240 mm, 16 kg

Inquiry Form

No.162-S5 5 HANGINGS SLIP TESTER

JIS-P8147、ASTM-D1894、D3248、TAPPI-(T503)、(T542)、T815
No.162-S5 5 HANGINGS SLIP TESTER
  • This tester is the digital and 5 hanging version of the SLIP TESTER.
  • The tester enables the operator to measure the static friction coefficient of 5 test specimens per test.
  • The static friction coefficient can be shown on the LCD screen and can also be printed out.
  • The computer system of the tester will also calculate the average static friction coefficient of the 5 test specimens.

 

 

Specification

Specifications are subject to change without notice.
Sled W41 mm, L26 mm, Mass 150 g, 5 pcs
Inclination Board W320 mm, L325 mm
Inclination Angle 0 to 70° (Scale 0.1°)
Inclination Speed 1°/s
Return Speed 3°/s, Automatic Return System
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W580 × D700 × H380 mm, 50 kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.