No.148-HD HEAT DISTORTION TESTER MOVIE


-OPERATION & MOTION VIDEO-

No.148-HD HEAT DISTORTION TESTER

JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1、306
No.148-HD HEAT DISTORTION TESTER
  • This tester is used to evaluate the heat resistance of plastic.
  • By loading specified bending stress to the test specimen while increasing the test temperature of the oil bath at a certain rate, the operator is to report the temperature at which the test specimen reaches standard deflection.
  • The tester can also conduct the VICAT softening temperature test.

⇒ Examples of Use

 

No.148-HD Specification

Specifications are subject to change without notice.
Stations 3, 4 or 6 Stations
Temperature Range Max. 300°C (Oil Bath)
Heating Speed 120 ± 10°C/hr, 50 ± 5°C/hr, VICAT: 120 ± 10℃/hr, 50 ± 5°C/hr
Bending Stress JIS・ISO: 1.80MPa (Method A), 0.45MPa (Method B), 8.00Mpa (Method C)
ASTM: 1.82Mpa, 0.455Mpa
Weight Load DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf
Options
VICAT: 10 ± 0.2N, 50 ± 1N
BP: 19.6 ± 20N
Displacement Measurement Differential Transformer: Scale 1/1,000mm, Stroke 4mm
Pressure Foot DTUL: R3.0 ± 0.2mm
Options
VICAT: 1.000 ± 0.015mm²
BP: Ball Diameter 5mm
Support Length 64 ± 1mm, 100 ± 1mm
Option 101.6 ± 0.5mm
Refrigerating Device Water Circulating System
Option Built-In Refrigerator
*For low test start temperature (e.g., 20 to 23°C)
Oil Circulation Device Propeller Type
For 3 and 4 Stations: 2 Propellers
For 6 Stations: 3 Propellers
Software Windows 10 compatible(Included)
Accessories Pressure Foot Adjustment, Specimen Holder
Options Silicon Oil, Safety Cover, Simultaneous Loading Device, Built-In Printer, Oil Level Sensor, Glass Sample for Calibration (Fused Quartz), Safety Door Lock, Signal Tower Light
Power Source Without refrigerator
For 3 and 4 Stations: Single-Phase, AC200/220V 20A 50/60Hz
For 6 Stations: Single-Phase, AC200/220V 30A 50/60Hz
With refrigerator
For 3 and 4 Stations: Three-Phase, AC200/220V 20A 50/60Hz
For 6 Stations: Three-Phase, AC200/220V 30A 50/60Hz
Dimensions & Weight (Approx.) Floor Model
W1,100 × D700 × H1,500mm
180 to 300 kg
Tabletop Model
W1,100 × D700 × H1,000mm
155 to 185 kg

Inquiry Form

No.148-HDA HEAT DISTORTION TESTER (FULL AUTOMATIC) MOVIE


-OPERATION & MOTION VIDEO-

No.148-HDA HEAT DISTORTION TESTER (FULL AUTOMATIC)

JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1、306

  • This tester is the fully automatic version of the HEAT DISTORTION TESTER.
  • The robotic mechanism enables the operator to conduct the usual heat distortion test and VICAT softening temperature test automatically.
  • By setting the test specimen to the specimen feeder, the computer software will continuously conduct heat resistance test for a maximum of 120 samples.

No.148-HDA Specification

Specifications are subject to change without notice.
Stations 3 or 6 Stations
Temperature Range Max. 300°C (Oil Bath)
Heating Speed 120 ± 10°C/hr and 50 ± 5 °C/hr, VICAT: 120 ± 10℃/hr, 50 ± 5°C/hr
Bending Stress JIS・ISO: 1.80MPa (Method A), 0.45MPa (Method B), 8.00Mpa (Method C)
ASTM: 1.82Mpa, 0.455Mpa
Weight Load DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf
*Simultaneous Loading Device included
Options
VICAT: 10 ± 0.2N, 50 ± 1N
BP: 19.6 ± 20N
Displacement Measurement Differential Transformer: Scale 1/1,000 mm, Stroke 4 mm
Pressure Foot DTUL: R3.0 ± 0.2mm
Options
VICAT: 1.000 ± 0.015mm²
BP: Ball Diameter 5mm
Support Length 64 ± 1mm, 100 ± 1mm
Option 101.6 ± 0.5mm
Refrigerating Device Water Circulating System, Built-In Refrigerator
*For low test start temperature (e.g., 20 to 23°C)
Oil Circulation Device Propeller Type
For 3 and 4 Stations: 2 Propellers
For 6 Stations: 3 Propellers
Test Specimens 40 pcs × 3 sets (Total 120 pcs)
*For T10mm
Software Windows 10 compatible (Included)
Accessories Pressure Foot Adjustment, Specimen Holder
Options Silicon Oil, Glass sample for calibration (fused quartz), Built-in printer, Oil level sensor, Safety door lock, Signal tower light
Power Source Without refrigerator
For 3 and 4 Stations: Single-Phase, AC200/220V 20A 50/60Hz
For 6 Stations: Single-Phase, AC200/220V 30A 50/60Hz
With refrigerator
For 3 and 4 Stations: Three-Phase, AC200/220V 20A 50/60Hz
For 6 Stations: Three-Phase, AC200/220V 30A 50/60Hz
Air Source 0.5MPa or more
Dimensions & Weight (Approx.) W1,460 × D900 × H1,715mm
450 to 550kg

Inquiry Form

No.148-HD500 HIGH TEMPERATURE HEAT DISTORTION TESTER

JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1,306
No.148-HD500 HIGH TEMPERATURE HEAT DISTORTION TESTER

  • This tester adapts the air circulating heating system to test the heat resistance of plastic (usually super engineering plastic) up to 500 °C.
  • The specimen racks are made by glass quartz to prevent measuring disturbances due to the deflections of the racks itself.

No.148-HD500 Specification

Specifications are subject to change without notice.
Stations 3 Stations
Temperature Range Max. 500°C (Air Chamber, Nitrogen Gas Filling Device Attached)
Heating Speed 120 ± 10°C/hr, 50 ± 5°C/hr, VICAT : 120 ± 10 ℃/hr, 50 ± 5°C/hr
Bending Stress JIS・ISO: 1.80MPa (Method A), 0.45MPa (Method B), 8.00Mpa (Method C)
ASTM: 1.82Mpa, 0.455Mpa
Weight Load DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf
*Simultaneous Loading Device included
Options
VICAT: 10 ± 0.2N, 50 ± 1N
BP: 19.6 ± 20N
Displacement Measurement Differential Transformer: Scale 1/1,000mm, Stroke 4mm
Pressure Foot DTUL: R3.0 ± 0.2mm
Options
VICAT: 1.000 ± 0.015mm²
BP: Ball Diameter 5mm
Support Length 64 ± 1mm, 100 ± 1mm
Refrigerating Device Fan type (Air Fan Cooling), 3 Fans
Oil Circulation Device Propeller type, 2 propellers
Software Windows 10 Compatible (Included)
Accessories Pressure Foot Adjustment, Specimen Holder
Options Simultaneous Loading Device, Built-in Printer, Carbon Gas Injection Cooling System, Glass Sample for Calibration (Fused Quartz), Signal Tower Light
Power Source AC 200V, Single-Phase, 30A, 50/60Hz
Dimensions & Weight (Approx.) W1,100 × D750 × H1,560mm/ 260kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.