No.214 OXYGEN INDEX FLAMMABILITY TESTER

JIS K6269, K7201, L1091, ASTM D2863, ISO 4589-2, Japanese Fire Services Act

No.214 OXYGEN INDEX FLAMMABILITY TESTER

  • This tester is used to evaluate the oxygen index flammability of plastic and rubber.
  • The operator is to check the lowest oxygen level (the oxygen level is acquired from a mixture gas of oxygen and nitrogen) that the test specimen is capable to flame inside the flaming column.

Specification

Specifications are subject to change without notice.
Model No.214 No.214-ISO
Glass Column Inner φ75 + 3 mm, H450 ± 5 mm Inner φ95 mm, H450 mm,
Upper Seal φ40mm
Flow Meter Oxygen:
Max. 8.6 L/min (Scale 0.1 L/min)
Flow Meter:
Max. 11 L/min (Scale 0.1 L/min)
Oxygen:
Max. 20 L/min (Scale 0.1 L/min)
Flow Meter:
Max. 20 L/min (Scale 0.1 L/min)
Pressure Gauge Oxygen: Max. 0.1 MPa (Scale 0.002 MPa)
Nitrogen: Max. 0.1 MPa (Scale 0.002 MPa)
Mixed Gas: Max. 0.1 MPa (Scale 0.002 MPa)
Oxygen: Max. 0.1 MPa (Scale 0.002 MPa)
Nitrogen: Max. 0.1 MPa (Scale 0.002 MPa)
Mixed Gas: Max. 0.1 MPa (Scale 0.002 MPa)
Burner Flame L6 to 25 mm (Adjustable) Flame L6 to 25 mm (Adjustable)
Specimen Plastic, Rubber and Textile Plastic, Rubber and Textile
Accessories U-shape Specimen Holder, Glass Bead U-shape Specimen Holder
Option Thermometer, Jig for Hoist Specimen, HighTemperature Testing Spec (HT),Oxygen Density Analyzer Thermometer, Jig for Hoist Specimen, HighTemperature Testing Spec (HT),Oxygen Density Analyzer
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz
Heat Source Mehane Gas (Purity: 98 % Over ) or Urban Gas Mehane Gas (Purity: 98 % Over ) or Urban Gas
“Gas Supply” Oxygen and Nitrogen Oxygen and Nitrogen
Dimensions/ Weight (Approx.) W600 × D300 × H580 mm, 35 kg W600 × D270 × H580 mm, 25 kg

Inquiry Form

No.252-UL-94 PLASTIC FLAMMABILITY TESTER

UL-94、JIS K6911、ASTM D635、D3801、D4804、D5025、D5207、ISO 1210

No.252-UL-94-M PLASTIC FLAMMABILITY TESTER

  • This tester is used to evaluate the burn-resistance of plastic according to the vertical flaming test (V) and horizontal flaming test (HB).
  • The tester has been improved so that the operator can conduct the test easily by using the jog dial type controller and the touch panel display also equipped with voice guidance.
  • With these functions, the operator can concentrate in watching the condition of the test specimen while controlling the burner to adjust the distance between the flame and the test specimen.
  • Adding the option jigs, the tester will enable to carry out other test methods (5V, VTM, HBF, HF).

Specification

Specifications are subject to change without notice.
Model No.252-UL-94 (MANUAL) No.252-UL-94 (ELECTRIC SYSTEM)
Chamber 1,000 × 560 × 900 mm(Volume Approx. 0.5 m3) 1,000 × 560 × 900 mm(Volume Approx. 0.5 m3)
Specimen L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less
Burner L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm
Burner Base Slide type (With Operation Handle), Inclination Angle 45 ± 2°, 20 ± 5° (5 V) Slide type (With Jog Dial type Controller), Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner Calibration Device Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min)
Flow Meter: Max. 1,000 ml/min (Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 200 (± 100) mmH2O (Scale 1 mmH2O) (Standard 10 mmH2O)
Timer, Built-In Thermometer
Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min)
Flow Meter: Max. 1,000 ml/min (Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 200 (± 100) mmH2O (Scale 1 mmH2O) (Standard 10 mmH2O)
Timer, Built-In Thermometer
Accessories Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand,
Wire Mesh, Dry Cotton Pad, Fireproof Gloves
Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand,
Wire Mesh, Dry Cotton Pad, Fireproof Gloves
Option Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V), Spring Clamp (VTM), Foam Support Fixture
Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V), Spring Clamp (VTM), Foam Support Fixture
Power Source AC 100 V, 1-Phase, 15 A, 50/60 Hz AC 100 V, 1-Phase, 10 A, 50/60 Hz
Heat Source Methane Gas (Purity: 98 % Over) Methane Gas (Purity: 98 % Over)
Dimensions/ Weight (Approx.) W1,400 × D700 × H1,220 mm 100 kg W1,400 × D700 × H1,220 mm 218 kg

Inquiry Form

No.252-UL-1581 ELECTRIC WIRE FLAMMABILITY TESTER

UL-1581、ASTM D5025、D5207
 
No.252-UL-1581 ELECTRIC WIRE FLAMMABILITY TESTER
No.252-UL-1581 ELECTRIC WIRE FLAMMABILITY TESTER
No.252-UL-1581 ELECTRIC WIRE FLAMMABILITY TESTER
 
  • This tester is to evaluate the flammability resistance of electric wires by conducting a vertical flammability test.
  • The operator is to fix the test specimen to the upper and lower Chuck and tilt the burner 20° to burn the test specimen for 15 seconds.

Specification

Specifications are subject to change without notice.
Chamber 1.6 × 1.6 × 1.6 m (Volume Approx. 4 m3)
Specimen L450 ± 10 mm
Burner L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm
Burner Base Inclination Angle 20°
Burner Calibration Device Flow Meter: Max. 1,000 ml/min (Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 500 (± 250) mmH2O (Scale 1 mmH2O) (Standard 125 ± 15 mmH2O)
Timer, Thermometer, Slug
Accessories Flame Gauge, Ring Stand, Gauge for Slug, Dry Cotton Pad
Power Source Tester Body: AC 100 V, 1-Phase, 3 A, 50/60 Hz
Calibration Device: AC 100 V, 1-Phase, 3 A, 50/60 Hz
Heat Source Methane Gas (Purity: 98 % Over)
Dimensions/ Weight (Approx.) W2,000 × D1,600 × H2,350 mm, 442 kg (Chamber)
W540 × D420 × H1,100 mm, 28 kg (Calibration Device)

Inquiry Form

No.440 FLAMMABILITY TESTER FOR TEXTILE

JIS L1091
No.440 FLAMMABILITY TESTER FOR TEXTILE
  • This tester is used to test the flammability (flaming speed) of thin cloth (scarfs and clothes).
  • The C Method is to measure the speed that the test specimen burned.
  • The operator is to measure the length and the width of the burn and acquire the average to calculate the flammability.

Specification

Specifications are subject to change without notice.
Specimen 50 × 150 mm
Burner Propane Gas Burner, Flame Height 16 mm
Timer Max. 999.9 sec (Preset type)
Flame Angle 45°
Flaming Time 1 sec
Flame Height Adjustment Needle Valve type, U-Shaped Manometer
Specimen Holder Angle 30°、45°、60°
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz
Heating Source Liquid Nitrogen Gas Type 2 No.4
Dimensions/ Weight (Approx.) W400 × D320 × H530 mm, 30 kg

Inquiry Form

No.440-S MVSS FLAMMABILITY TESTER

FMVSS-302、JIS D1201、(JASO)、ISO 3795、ASTM D5132

No.440-S MVSS FLAMMABILITY TESTER

  • This tester is used to evaluate the flammability of inner material for cars, tractors, and machines.
  • Attaching the test specimen to a U-shaped specimen holder and flaming the free end for 15 seconds, the operator is to measure the flaming speed of the test

Specification

No.440-S1

Specifications are subject to change without notice.
Model No.440-S1 (FMVSS, ASTM) No.440-S1(FMVSS、ASTM)
Standard FMVSS ASTM
Specimen(Standard) W 102 mm,
L 356 mm,
T 13 mm or Less
W 100 mm,
L 300 mm,
T 13 mm or Less
Bunsen Burner Inner φ10 mm Inner φ9.5±0.3 mm
Heat Source Natural Gas Methane Gas or Natural Gas
(Calorific Value37 ± 1 MJ/m3)
Specimen Holder U-shape with Groove (Pitch 25 mm),Marked Line U-shape with Groove (Pitch 25 mm),Marked Line
Heat-Resisting Wire φ0.25 mm φ0.25 mm
Accessories Specimen Attachment Set, Termometer, LPG Gas Hose,
Hose Band, Flame Gauge, Heat-Resisting Wire,
Specimen Holder (Only No.440-S1), Bobbin (Only No.440-S1), Saucer (Only No.440-S2)
Specimen Attachment Set, Termometer, LPG Gas Hose,
Hose Band, Flame Gauge, Heat-Resisting Wire,
Specimen Holder (Only No.440-S1), Bobbin (Only No.440-S1), Saucer (Only No.440-S2)
Option Timer (Flaming Time Control), Spirit Level, Heat-Resisting Wire(Spare) Timer (Flaming Time Control), Spirit Level, Heat-Resisting Wire(Spare)
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz (with Timer) AC 100 V, 1-Phase, 5 A, 50/60 Hz (with Timer)
Dimensions/ Weight (Approx.) W480 × D250 × H580 mm/ 25 kg W480 × D250 × H580 mm/ 25 kg

No.440-S2

Specifications are subject to change without notice.
Model No.440-S2(JIS、ISO、JASO) No.440-S2(JIS、ISO、JASO)
Standard JIS、ISO JASO
Specimen(Standard) When W3 to 60mm
L 356 mm,
T 13 mm or Less
When W60 to 100mm
L 138 mm,
T 13 mm or Less
W 100 mm,
T 356 mm
Bunsen Burner Inner φ9.5±0.5 mm Inner φ10 mm
Heat Source Natural Gas
(Calorific Value38 MJ/m3)
Natural Gas
(Calorific Value38 MJ/m3)
Specimen Holder U-shape with Groove (Pitch 25 mm),Pin Tray U-shape with Groove (Pitch 25 mm),Pin Tray
Heat-Resisting Wire φ0.25 mm φ0.25 mm
Accessories Specimen Attachment Set, Termometer, LPG Gas Hose,
Hose Band, Flame Gauge, Heat-Resisting Wire,
Specimen Holder (Only No.440-S1), Bobbin (Only No.440-S1), Saucer (Only No.440-S2)
Specimen Attachment Set, Termometer, LPG Gas Hose,
Hose Band, Flame Gauge, Heat-Resisting Wire,
Specimen Holder (Only No.440-S1), Bobbin (Only No.440-S1), Saucer (Only No.440-S2)
Option Timer (Flaming Time Control), Spirit Level, Heat-Resisting Wire(Spare) Timer (Flaming Time Control), Spirit Level, Heat-Resisting Wire(Spare)
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz (with Timer) AC 100 V, 1-Phase, 5 A, 50/60 Hz (with Timer)
Dimensions/ Weight (Approx.) W520 × D260 × H580 mm/ 25 kg W520 × D260 × H580 mm/ 25 kg

Inquiry Form

No.440-B VERTICAL FLAMMABILITY TESTER FOR TEXTILE

JIS L1091, L1091(appendix 8)
No.440-B VERTICAL FLAMMABILITY TESTER FOR TEXTILE
  • This tester is used to test the flammability of textile products (bedclothes).
  • The A-4 method (vertical method) is to measure the burning length and the alternative method (vertical burner method) is to measure the degree of spread of the burn and the after-flame.

Specification

Specifications are subject to change without notice.
Test Method A-4 Method (Vertical Method) Alternative Method (Vertical Burner Method)
Burning Box Inner Diameter:
W329 × D329 × H762 mm
Inner Diameter:
W304.8 × D304.8 × H762 mm
Specimen 89 × 254 mm 70 × 300 mm
Burner Angle Busen Burner, Inner Diameter φ11 mm,
Flame Height 38 mm, Attaching
25° to Vertical Direction
Busen Burner, Inner Diameter φ9.5 mm,
Flame Height 38 mm, Attaching
Vertical
Burner Movement Automatic Sliding Automatic Sliding
Timer Ignition Timer: Max. 999.9 sec (Preset method)
Flaming Timer: Max. 99,999.9 sec (Preset method)
After-flame Timer: Max. 99,999.9 sec (Running method)
After-glow Timer: Max. 99,999.9 sec (Running method)
Ignition Timer: Max. 999.9 sec (Preset method)
Flaming Timer: Max. 99,999.9 sec (Preset method)
After-flame Timer: Max. 99,999.9 sec (Running method)
After-glow Timer: Max. 99,999.9 sec (Running method)
Igniter Automatic Ignition (Plug Method) Automatic Ignition (Plug Method)
Load 0.54 N, 1.12 N, 2.23 N, 3.34 N (1 pc Each) 1.11 N, 2.23 N, 3.33 N, 4.45 N (1 pc Each)
Accessories Specimen Holder, Flame Height Measuring Stand, Scale Specimen Holder, Flame Height Measuring Stand, Scale
Power Source AC 100 V, 1-Phase, 5 A, 50/60 Hz AC 100 V, 1-Phase, 5 A, 50/60 Hz
Heat Source Methane Gas (Purity: 97 % Over) Liquid Petroleum Gas or City Gas
Dimensions/ Weight (Approx.) W580 × D450 × H950 mm, 50 kg W580 × D450 × H950 mm, 50 kg

Inquiry Form

No.455 45° FLAMMABILITY TESTER FOR TXTILE

JIS A1322, L1091, L4404, Z2150

No.455 45° FLAMMABILITY TESTER FOR TXTILE

  • This tester is to used to test the flammability of textile products (curtains).
  • The A-1 (45° micro burner method) and A-2 (45° Meckel burner method) methods are to measure the degree of spread of the burn and the after-flame.
  • The D method is to measure the times it takes for the test specimen to completely burn out.
  • The tester can also be organized so that it can conduct the B method which is to measure the after-flame time and flaming distance.

Specification

Specifications are subject to change without notice.
Test Method Standard Spec B Method Spec
(Surface Flaming Test)
Specimen A-1 and A-2 Method: 350 × 250 mm
D Method: W100 mm, Mass 1 g
Attaching Angle: 45°
220 × 400 mm
Burner A-1 and D Method:
Micro Burner, Flame Height 45 mm
A-2 Method:
Meckel Burner, Flame Height 65 mm
Air Mix Burner: Flame Height 24 mm
*Pressure of 3.92 kPa/hr
Timer Heating Timer: Max. 999.9 sec
Flaming: Max. 999.9 sec
After-flame Timer: Max. 99999.9 sec
After-glow Timer: Max. 99999.9 sec
Igniter Automatic Ignition (Plug Method) Automatic Ignition (Plug Method)
Accessories Specimen Holder (A-1 and A-2 Method),
Specimen Holding Coil (D Method),
Flame Height Measuring Stand,
Remote Control Button
Pearlite Plate, Specimen Holder
Power Source AC 100 V, 1-Phase, 3 A, 50/60 Hz AC 100 V, 1-Phase, 3 A, 50/60 Hz
Heat Source Liquid Nitrogen Gas Type 2 No.4 Liquid Nitrogen Gas Type 2 No.4
Dimensions/ Weight (Approx.) Tester Body:
W420 × D330 × H940 mm, 22 kg
Control Box:
W370 × D300 × H220 mm, 9 kg
Tester Body:
W560 × D330 × H940 mm, 25 kg
Control Box:
W370 × D300 × H220 mm, 9 kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*

    Request*

    Motive*

    Company Name*

    *Please input as much information as possible.

    Department

    First name*

    Last name*

    ZIP Code*

    Country*

    Address*

    Telephone Number*

    E-Mail Address*

    Description*