No.183 FALLING BALL IMPACT TESTER
JIS (K5400)、K5600-5-3、(K6718)、(K6745)、K7211、ISO 6272
- This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
- The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
Specification
| Specifications are subject to change without notice. | |
| Falling Height | 50 to Max. 1,000 mm (Pitch 50 mm) 50 to Max. 2,000 mm (Pitch 50 mm) |
| Falling Weight | Depends on the Standards |
| Specimen Holder | Depends on the Standards |
| Accessories | Spirit Level: 1 pc, Foot Switch |
| Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | Tester Body: W650 × D550 × H1,400 to 2,500 mm, 110 kg Control Box: W350 × D300 × H250 mm, 8 kg |
No.183-S FALLING DART IMPACT TESTER
JIS K6742、K6743
- This tester is used to evaluate the impact resistance of impact resistance hard vinyl chloride pipe (HIVP) and hard vinyl chloride pipe joint (HITS).
- The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
Specification
| Specifications are subject to change without notice. | |
| Falling Dart | Flat Cylinder Bottom: Mass 1 kg, 3 kg, 9 kg (3 kinds) Circular Cone: Mass 9 kg |
| Receiver | Flat type, V type (2 kinds) |
| Falling Height | 100 to Max 2,000 mm |
| Falling Device | Solenoid Coil |
| Falling Device | Solenoid Coil |
| Repeated Impact Prevention Device | Ratchet-Operated |
| Power Source | AC 100 V, 1-Phase, 15 A, 50/60 Hz |
| Dimension/ Weight (Approx.) | W800 × D800 × H3,000 mm, 200 kg |