No.121 BRITTLENESS TEMPERATURE TESTER

JIS C3005, K6261, K6723, K7216, ASTM D746, D2137, ISO 812, 974

 

BRITTLENESS TEMPERATURE TESTER
  • This tester is used to measure the 50% impact brittleness temperature of plastic, rubber, and electric insulated wire at low temperature.
  • By attaching one end of the test specimen to the holder and adding impact to the other end, the operator is to check for any breaks to the test specimen.
  • The refrigerating method for 121 is dry ice and the 121-R is equipped with a refrigerator.

 

 

No.121 Specification

Specifications are subject to change without notice.
Hangings 5 Hangings (1 Holder)
Specimen W6.0 ± 0.4mm, L38 ± 2 mm , T2.0 ± 0.2 mm (Type A)
Striking Edge Top R1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm, Distance to Striking Point 8.0 ± 0.2 mm
Striking Speed 2.0 ± 0.2 m/s
Temperature Range Room Temperature to -70 °C (Dry Ice & Refrigeration Medium)
Refrigeration Medium Amount Approx. 15 L
Accessories Tightening Rod, Torque Driver, Specimen Cutter
Option Rotary Holder (5 Hangings × 4 Holders), Specimen Holder (Type B)
Power Sourc AC 100 V, 1-Phase, 15 A, 50/60 Hz
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.) W770 × D830 × H550 mm/ 155 kg

Inquiry Form

No.121-RA BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE/ ROTARY HOLDER TYPE)

JIS C3005, K6261, K6723, K7216, ASTM D746, D2137, ISO 812, 974

 

No.121-RA BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE/ ROTARY HOLDER TYPE)
  • This tester is equipped with a rotary holder to continuously run maximum of 4 tests.
  • The testing condition (test temperature and dip time) for the 4 tests can be set on the touch panel screen, which will enable efficient testing.

 

 

 

No.121-RA Specification

Specifications are subject to change without notice.
Hangings 5 Hangings × 4 Holders (Total 20 Hangings), Automatic Operation System
Specimen W6.0 ± 0.4mm, L38 ± 2 mm , T2.0 ± 0.2 mm (Type A)
Striking Edge Top R1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm, Distance to Striking Point 8.0 ± 0.2 mm
Striking Speed 2.0 ± 0.2 m/s
Temperature Range Room Temperature to -70 °C (Refrigerator & Refrigeration Medium)
Refrigeration Medium Amount Approx. 15 L
Accessories Tightening Rod, Torque Driver, Specimen Cutter
Option Specimen Holder (Type B)
Power Source AC 200 V, 3-Phase, 30 A, 50/60 Hz
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.) W970 × D950 × H1,900 mm, 450 kg

Inquiry Form

No.121-R BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE)

JIS C3005、K6261、K6723、K7216、ASTM D746、ISO 812、974
No.121-R BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE)
  • This tester is used to measure the 50 % impact brittleness temperature of plastic, rubber, and electric insulated wire at low temperature.
  • By attaching one end of the test specimen to the holder and adding impact to the other end, the operator is to check for any breaks to the test specimen.
  • The refrigerating method for 121 is dry ice and the 121-R is equipped with a refrigerator.

 

 

No.121-R Specification

Specifications are subject to change without notice.
Hangings 5 Hangings (1 Holder), Automatic Operation System
Specimen W6.0 ± 0.4mm, L38± 0.2 mm , T2.0 ± 0.2 mm (Type A)
Striking Edge Top R1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm, Distance to Striking Point 8.0 ± 0.2 mm
Striking Speed 2.0 ± 0.2 m/s
Temperature Range Room Temperature to -70 °C (Refrigerator & Refrigeration Medium)
(Option: Combined with Liquid Nitrogen -100 °C)
Refrigeration Medium Amount Approx. 15 L
Accessories Tightening Rod, Torque Driver, Specimen Cutter
Option Rotary Holder (5 Hangings × 4 Holders), Specimen Holder (Type B)
Power Source AC 200 V, 3-Phase, 30 A, 50/60 Hz
Dimensions/ Weight (Approx.) W970 × D950 × H1,900 mm/ 450 kg

Inquiry Form

No.121-AUTO BRITTLENESS TEMPERATURE TESTER (FULL AUTOMATIC)

JIS C3005、K6261、K6723、K7216、ASTM D746、D2137, ISO 812、974
No.121-AUTO BRITTLENESS TEMPERATURE TESTER (FULL AUTOMATIC)
  • This tester is the robotic version of the BRITTLENESS TEMPERATURE TESTER.
  • By inputting the test conditions in the computer software, the operator can continuously run 40 tests (200 samples).

 

 

 

No.121-AUTO Specification

Specifications are subject to change without notice.
Hangings 5 Hangings × 40 Holders (Total 200 Hangings)
Specimen W6.0 ± 0.4 mm, L38 ± 2 mm, T2.0 ± 0.2 mm (Type A)
Striking Edge Top 1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm, Distance to Striking Point 8.0 ± 0.2 mm
Striking Speed 2.0 ± 0.2 m/s
Temperature Range Room Temperature to -70 °C (Refrigerator & Refrigeration Medium)
Refrigeration Medium Amount Approx. 15 L
Software Windows Compatible
Accessories Tightening Rod, Torque Driver, Specimen Cutter
Option Specimen Holder (Type B)
Power Source AC 200 V, 3-Phase, 30 A, 50/60 Hz
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.) W1,160 × D1,030 × H2,150 mm/ 612 kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.