No.151 DIN ABRASION TESTER

JIS K6264-2、ISO 4649、DIN-53 516
No.151 DIN ABRASION TESTER
  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic rubber.
  • By pressing the test specimen at a certain test load against the rotating drum that has an abrasive cloth on the abrading surface, the operator is to acquire the abrading mass of the test specimen. Test specimens include tires and belts.
  •  
     

 

No.151-H DIN ABRASION TESTER (WITH CONSTANT TEMPERATURE CHAMBER)

JIS K6264-2、ISO 4649、DIN-53 516

 

No.151-H DIN ABRASION TESTER (WITH CONSTANT TEMPERATURE CHAMBER)
  • This tester can assemble a chamber in order to conduct the test at high temperature such as 100 degree.

 

 

 

 

No.151/No.151-H Specification

Specifications are subject to change without notice.
Model No.151 DIN ABRASION TESTER No.151-H DIN ABRASION TESTER
(WITH CONSTANT TEMPERATURE CHAMBER)
Test Metho Method A and B Method A and B
Specimen Disc shape, φ16.0 ± 0.2 mm, T6 to 10 mm Disc shape, φ16.0 ± 0.2 mm, T6 to 10 mm
Rotating Drum φ150 mm, L460 mm φ150 mm, L450 mm
Drum Rotation Speed 40 ± 1 rpm 10 to 100 rpm (Standard: 40 ± 1 rpm)
Feed Speed 2.8 mm/s 1.5 to 15 mm/s (Standard: 2.8 mm/s)
Weight Load 10.0 ± 0.2 N or 5.0 ± 0.1 N 10.0 ± 0.2 N or 5.0 ± 0.1 N
Abrasive Cloth W400 mm or More, Material: Alumina, Grit P60 W400 mm or More, Material: Alumina, Grit P60
Temperature Range Max. 100 °C
Accessories Suction Device (Vacuum Cleaner), Specimen Setting Gauge,
Standard Specimen: 1 sheet, Metal Specimen: 2 pcs, Specimen Cutter
Suction Device (Vacuum Cleaner), Specimen Setting Gauge,
Standard Specimen: 1 sheet, Metal Specimen: 2 pcs, Specimen Cutter
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions/ Weight (Approx.) W750 × D430 × H430 mm/ 52 kg W1,130 × D920 × H745 mm/ 255 kg

Inquiry Form

No.271 NBS RUBBER ABRASION TESTER

ASTM D1630

 

No.271 NBS RUBBER ABRASION TESTER
  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermo-plastic rubber.
  • By pressing the test specimen at a constant load to the abrasive-coated paper which is wrapped to the rotating drum, the operator is to acquire the abrasion resistance by the number of rotations the drum made.

 

 

No.271 Specification

Specifications are subject to change without notice.
Hangings 3 Hangings
Specimen 25 × 25 × T6.35 mm
Rotating Drum φ150 mm
Drum Rotation Speed 45 ± 5 rpm
Abrasive Paper W250 mm, Material: G, Grit #40
Counter 6 Digits Preset Counter
Dial Gauge Scale 1/100 mm, Stroke Max. 10 mm
Weight 2,265 gf: 3pcs
Air Nozzle 3 pcs, Air Pressure 241 ± 35 kPa
Accessories Fixing Band: 4 pcs
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W765 × D510 × H500 mm/ 145 kg

Inquiry Form

No.275 WILLIAMS ABRASION TESTER

JIS K6264-2、ISO 4649

 

No.275 WILLIAMS ABRASION TESTER
  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermo-plastic rubber.
  • The operator is to determine the volume loss due to the abrasive action of rubbing two flat and non rotating test specimens to an abrading wheel.
  • This tester is usually used on test specimens that are applied for tires and shoe soles.

 

 

No.275 Specification

Specifications are subject to change without notice.
Specimen (20 ± 0.5) × (20 ± 0.5) × T10 mm
Specimen Position Left-Right 63.5 mm from center of wheel
Weight Load 35.5 N(3.62 kgf)
Abrasion Wheel Outer Diameter φ165 mm, Inner Diameter φ70 mm, Material C, Grit #70
Wheel Rotation Speed 37 ± 3 rpm
Air Nozzle Vent φ1.0 mm (Pitch 6 mm): Upper & Lower 3 pcs each, Air Pressure 180 kPa
Pressure Gauge Max. 1 MPa (Scale 0.1 MPa)
Timer Max. 99 min 59 sec
Accessories Specimen Cutter
Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.) W700 × D520 × H560 mm/ 55 kg

Inquiry Form

No.152 AKRON RUBBER ABRASION TESTER

JIS K6264-2、ISO 4649

 

No.152 AKRON RUBBER ABRASION TESTER
  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic rubber.
  • By pressing the rotating circular test specimen at a certain test load to the circumference surface of the abrading wheel, the operator is to acquire the abrading mass of the test specimen.
  • The test specimen will usually be tires and shoe soles.

 

 

No.152 Specification

Specifications are subject to change without notice.
Specimen φ63.5 ± 0.5 mm, T12.7 ± 0.5 mm, φ12.7 ± 0.1 mm
Specimen Rotation speed 250 ± 5 rpm
Inclination Angle 0 to 30° (Normal: 15°)
Test Load 27.0N (2.75kgf), 44.1N (4.50kgf)
Option Suction Device (Vacuum Cleaner)
Power source AC 100 V, 1-phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.) W600 × D420 × H580 mm/ 77 kg

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.