No.536 DENSITY CUP
JIS (K5400), K5600-2-4, K6833, ISO 2811
- The DENSITY CUP is used to measure the density of liquid paint and adhesion bond according to the density cup method.
- The operator is to measure the density at a prescript temperature and present the density in g/ml form.
Specification
| Specifications are subject to change without notice. | |
| Capacity | 100 ml, 50 ml |
| Dimensions | Outer Diameter φ45 × 90 mm (100 ml) *10 ml Capacity can also be specially manufactured. |
No.506 SPREAD METER
JIS K5101, K5701-1
- This tester is used to evaluate the flow ability of colorant and ink according to the spread meter method.
- The operator is to measure the radius of the test specimen’s spread, 60 seconds after when the upper plate which is placed on the parallel plate falls on to the test specimen.
Specification
| Specifications are subject to change without notice. | |
| Load Plate | Mass 115 ± 1 g (Material: Glass or Acrylic) |
| Scale | φ12 to φ100 (Pitch R1 mm) |
| Specimen Hole | Inner Diameter φ10 ± 0.03 mm, D6.37 ± 0.02 mm (Capacity 0.5 ml) |
| Falling Height | 20 ± 1 mm |
| Option | Hot Water Circulation Tank |
| Dimensions/ Weight (Approx.) | W160 × D110 × H180 mm, 4 kg |
No.506-PCM AUTOMATIC SPREAD METER
JIS K5101, K5701-1
Specification
| Specifications are subject to change without notice. | |
| Measuring Time | 10, 30, 60, 100, 150, 210 and 300 sec |
| Output | Diameter after 60 sec (D), Slope(S), Intercept(IC), Yield Value(YV) |
| Software | Windows Compatible |
| Option | Additional Weight Loading Device |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W315 × D350 × H700 mm, Main Body 20 kg |
No.505 FLOW CUP
JIS K5600-2-2, ISO 2431, ASTM D5125
-
-
- The FLOW CUP is used to evaluate the flowability and viscosity of paint according to the cup method.
- The cup is to be selected so that the flow time of the paint through the orifice becomes 30 to 100 seconds.
-
Specification
| Specifications are subject to change without notice. | |
| Orifice Diameter | φ3 mm, φ4 mm, φ5 mm, φ6 mm (4 kinds) |
| Specimen | 150 ml |
| Accessories | Stand, Spirit Level, Glass Plate |
| Option | Standard Calibration Oil (100 cSt, 200 cSt) [1 cSt = 1 mm2/s] |
| Dimensions/ Weight (Approx.) | W180 × D235 × H354 mm, 2 kg (Stand Included) ※JIS *Ford Cup can also be specially manufactured. |
No.507 WET FILM THICKNESS GAUGE
JIS (K5400), K5600-1-7, ISO 2808
- The WET FILM THICKNESS GAUGE is to measure the ink’s wet film thickness.
- The gauge is made by 3 rings. The center ring is smaller than the outer 2 rings and is eccentric so that when it is rolled on a wet paint, the operator can read the scale when the center ring touches the painted surface.
Specification
| Specifications are subject to change without notice. | |
| Scale | 0 to 25 µm, 0 to 50 µm, 0 to 100 µm, and 0 to 200 µm (Scale 20 Divisions) |
| Dimensions | φ60 × 27 mm |
| Mass | 0.3 kg *Please contact us for custom models. |
No.548-CKG SAG TESTER
JIS (K5400)
- This tester is used to evaluate the sagging characteristics of paint.
- The operator is to make 5 different paint coats all with different thickness and immediately placing the thicker side downwards so that the orbit line becomes vertical to the testing board to check the sagging condition.
Specification
| Specifications are subject to change without notice. | |
| Coating Thickness | 75, 100, 150, 200, 250 µm |
| Coating Width | 20 mm: 5 lines |
| Gap | 3 mm |
| Dimensions/ Weight (Approx.) | W140 × D40 × H 30 mm, 1 kg |
No.558 VOLUME DENSITY METER
JIS K5101
- This density meter measures the apparent density(g/ml) and apparent specific volume(ml/g) of pigment powder.
- It consists of a sieve, a funnel, and a density cup.
Specification
| Specifications are subject to change without notice. | |
| Density Cup Capacity | 30 ml |
| Sieve Aperture | 0.5 mm |
| Accessories | Brush, Spatula, Glass Beaker, Density Cup |
| Dimensions/ Weight (Approx.) | W225 × D200 × H270 mm, 1.3 kg |