No.199 VOLT-ENDURANCE AND DESTRUCTION TESTER

JIS C2110, (C3003), C3216-5, IEC-60851-5
No.199 VOLT-ENDURANCE AND DESTRUCTION TESTER
  • This tester is for evaluating the dielectric strength (volt endurance/ volt destruction) of solid electric insulating material.
  • By exchanging the electrodes, the tester can also be used for board, sheet, textile, film, tape, tube, varnish, and paint.
  • Recent applications also include insulating film in lithium-ion batteries.
  • After setting the specimen between the two electrodes, voltage is applied mid-air or in-bath until the specimen insulation destructs.
  • The results are evaluated either by the insulation strength or destruction voltage level.
  • The tester is capable of both the short-time test and step-by-step test.
  • The tester can also be used for enamel coatings using the twistpair method by exchanging the electrodes.

Specification

Specifications are subject to change without notice.
Capacity 0.5 to 10 kVA
Maximum Output Voltage AC 5 to 100 kV
Specimen L500 mm (Twisting L 120mm), φ0.05 〜 φ3.2 mm
Test Method
Oil Bath or Air Bath
Standard Equipments A-meter, V-meter, Volt-slider, Programmed Voltage Raising Device, Breakdown Current Regulator
Option Timer, Mini Printer, Software
Safety Device Safety Cover with Interlock Attached, Earth-Leakage Breaker, Upper Voltage Limit, Emergency Stop SW,
Warning Indicator & Buzzer
Electrode Selected by Specimen
Power Source AC 200 V, 1-Phase, 15 to 50 A, 50/60 Hz
Dimensions/ Weight (Approx.) Differ by Specifications.

No.199-T TWISTING DEVICE (VOLT-ENDURANCE AND DESTRUCTION TEST)

JIS (C3003), C3216-5, IEC-60851-5
No.199-T TWISTING DEVICE (VOLT-ENDURANCE AND DESTRUCTION TEST)
  • This device is used for enabling the twistpair method for enamel insulation testing, particularly for the No.199 VOLT-ENDURANCE AND DESTRUCTION TESTER.
  • The test specimen is folded in half, attached to the chucks of the device, and twisted at the set tension for twistpair method testing.
  • The No.199 VOLT-ENDURANCE AND DESTRUCTION TESTER can be used for testing.

Specification

Specifications are subject to change without notice.
1 Hanging 3 Hangings
Operation Manuel Electric ( Station-Linked )
Weight Load 0.29 〜 108N 0.29 〜 108N
Corresponding
Wire Diameter
0.4 to 1.2 mm 0.4 to 1.2 mm
Twisting Speed 60 twists/min
Safety Device Interlock Switch, Safety Cover, Leakage Breaker, Emergency Stop Switch
Accessories Weight 39 N, Spanner, Round Spirit Level
Power Source AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions/Weight(Approx. ) W250 × D250 × H750 mm, 20 kg Differ by Specifications.

Inquiry Form

Inquiry Form

    Catalog No. or Product Name*This field is required
    Serial No.*This field is required for inquiries regarding purchased yss testers
    Request*This field is required Place an OrderQuotationCatalogRepairCalibrationInquiry for Parts / ConsumablesOther
    Motive*This field is required First-Time InstallationUnit RenewalSample Test Before PurchasingInformation / Product DetailsEstimate for BudgetingOther
    Company Name*This field is required *Please input as much information as possible.

    Department
    First name*This field is required
    Last name*This field is required
    ZIP Code*This field is required
    Country*This field is required
    Address*This field is required
    Telephone Number*This field is required
    E-Mail Address*This field is required
    Description*This field is required.