No.162-EW SLIP TESTER (FOR ENAMELED WIRE)
- This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
- Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
- Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
- Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.
|Specifications are subject to change without notice.|
|Sled||W120 mm, L120 mm, Mass 500 g||W120 mm, L120 mm, Mass 500 g|
|Inclination Angle||0 to 90° (Scale 0.2°)||0 to 90° (Scale 0.2°)|
|Option||Changeable Inclination Speed Spec||Changeable Inclination Speed Spec|
|Power Source||AC 100 V, 1-Phase, 3 A, 50/60 Hz (Motorized)||AC 100 V, 1-Phase, 5 A, 50/60 Hz|
|Dimensions/ Weight (Approx.)||W750 × D270 × H425 mm/ 30 kg||W750 × D270 × H425 mm/ 30 kg|