No.226 HANDLE-O-METER (SURFACE FRICTION AND FLEXIBILITY TESTER) JIS L1096, TAPPI-(T498), J.TAPPI-No.34 Specification Specifications are subject to change without notice. Specimen Max. W235 mm Clearance 5 mm, 6.35 mm, 10 mm and 20 mm Pressing Board Curvature R1 mm, L240 mm,
No.219 ELECTRIC HEATING SYSTEM MINI TEST PRESS This pressure compacting machine is used to compress plastic and rubber. It is designed compactly so that it can be installed in testing labs. Specification Specifications are subject to
No.258 IMPACT TESTER JIS K7110、K7111-1、ASTM D256、D6110、ISO 179-1:2010、180 This pendulum type impact tester for plastic enables the operator to conduct both Charpy and Izod impact test just by changing the hammer and the anvil. The tester can be attached with
List of custom products in the past｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment. No.127 CABTYRE CABLE ABRASION TESTER JIS C3005 This tester is used to conduct an abrading test on rubber and plastic electric insulated wires.
No.536 DENSITY CUP JIS (K5400), K5600-2-4, K6833, ISO 2811 Specification Specifications are subject to change without notice. Capacity 100 ml, 50 ml Dimensions Outer Diameter φ45 × 90 mm (100 ml) *10 ml Capacity can also be specially manufactured. No.506
No.515 NEEDLE PENETRATION TESTER JIS K2207, K2220, ASTM D1321 This tester is used for measuring the needle penetration test of petroleum asphalt. If you attach a circular cone to the tester, you also can do the consistency test of grease.
No.567 RCI TYPE DRYING TIME RECORDER Specification Specifications are subject to change without notice. Hangings 6 Hangings Glass Plate 350 × 25 × T2 mm Measuring Distance Max. 300 mm Measuring Time 6 hr, 12 hr, 24 hr (3 Stage
No.549 NO PICK UP TIME TESTER JIS K5665,ASTM D711 Specification Specifications are subject to change without notice. Tire φ241 ± 6 mm, Top R8 ± 1 mm Over-All Width 368 mm Mass 15.8 ± 0.2 kg Inquiry Form